Offer

KDC rear trailed disc mowers

Description

 

 

Type KDC 260 KDC 300 KDC 340 KDC 260 S KDC 300 S/SL KDC 301 W KDC 340 S/SL KDC 341 W
Working width [m / ft] 2,60 / 8’7” 3,00 / 9’10” 3,40 / 11’2” 2,60 / 8’7” 3,00 / 9’10” 3,00 / 9’10” 3,40 / 11’2” 3,40 / 11’2”
Swath width [m / ft] 1,50 - 1,90 / 4’11’’-6’3’’ 1,30 - 1,50 / 4’4” - 4’11” 1,80 / 5’11” 1,50 - 1,90 / 4’11’’-6’3’’ 1,00 - 1,60/
3’3” - 5’3”
1,00 - 1,60 /
3’3” - 5’3”
1,30 - 2,00 /
4’4” - 6’7”
1,30 - 2,00 /
4’4” - 6’7”
Number of discs [pcs.] 6 7 8 6 7 7 8 8
Number of knives [pcs.] 12 14 16 12 14 14 16 16
ROM 540 / 1000
3-point hitch cat. II
Power demand [HP] from 60 from 80 from 90 from 70 from 90 from 90 from 110 from 110
Working capacity  [ha/h / ac/h] ~ 3,20  / ~8,20 ~ 3,50 / ~ 8,70 ~ 4,00 / ~ 10,00 ~ 3,20  / ~8,20 ~ 3,50 / ~ 8,70 ~ 3,50 / ~ 8,70 ~ 4,00 / ~ 10,00 ~ 4,00 / ~ 10,00
Necessary hydraulic couplers 1 x single acting
1 x double acting
Necessary hydraulic couplers with "T"
1 x single acting
1 x double acting
Weight [kg / lbs] 1550 / 3420 1650 / 3640 1755 / 3870 1850 / 4080 1910 / 4210 2100 / 4630 2095 / 4620 2280 / 5025
Weight with belt conveyor „T” [kg / lbs]
-
-
- 2250 / 4960
2350 / 2310 5180 / 5090
2500/5510
2495 / 2445
5500/5390
2680/5910
PTO shaft
tractor - mower: with friction clutch, 
built-in: 1. no clutch, 2. with overrunning clutch, 3. with overload clutch, 4. wide-angle u-join
Tires 340 / 55 / 16 400 / 50 / 15

 

* S / SL - tine conditioner / light-weight tine conditioner with plastic tines  W - roller conditioner

Due to its strategy of continuous development, SaMASZ reserves the right to change technical data at any time and without any notice. All operational data and graphical materials found at our website are for reference only. Some of the equipment items are optional and not included in the standard equipment. For more details concerning warranty, safety and products, please contact your local SaMASZ dealer.

 

List of dealers:http://www.samasz.com/en/dealers

 

 

Technical Details

SaMASZ_disc_mowers_KDC_01
 
Rear trailed disc mowers are equipped either with tine or roller conditioner. Long drawbar enables operation on the right as well as on the left side of the tractor. It allows sparing timeduring turns.


 
SaMASZ_disc_mowers_KDC_03
 
 


 

SaMASZ_disc_mowers_KDC_04 Adjusting screws

Regulate angle and working height of the transporter
   
SaMASZ_disc_mowers_KDC_05 Hard wide-angle shaft

Hard wide-angle 960 Nm PTO shaft, if lubricated every 8 hour, has a warranty for 1000 working hours!


Suspension

Wide rocking lever of suspension unit enables proper and stable operation of cutterbar
   
SaMASZ_disc_mowers_KDC_06

Turnable hitch

PTO shaft inside the drawbar is undoubtedly a modern solution
   
SaMASZ_disc_mowers_KDC_09 Belt conveyor

KDC mowers can be additionally equipped with bel conveyor. It enables forming of the swath during another run on the swath formed previously or near it. This solution contributes to time sparing and less fuel consumption. The mower equipped with belt conveyor enables direct forage pick-up by round baler or silage wagon.




There is a possibility to operate either with or without the conveyor. Mounting of the conveyor is easy and does not demand hydraulics instalation, because the drive is transmitted by means of tractor's hydraulics.
   
SaMASZ_disc_mowers_KDC_07 Long centrally mounted drawbar's arm enables mowing in one direction. Depending on working conditions the mower can be trailed on the right or left side of the tractor lying swath on the proper side.
 
 
SaMASZ_disc_mowers_KDC_08
Wide wheels

The mower is equipped with wide wheels enabling excellent adhesion, owing to which the mower is stable and perfectly operates on water-soaked meadows.
 


 
napis
1
Basing on the experience of our customers in Poland and in Western Europe we have introduced to our production a new model of cutterbar: Perfect CUT. Precise cut, high durability of components, protection against sudden disc stop in case of coming into an obstacle, quick and easy disc module replacement owing to modernized upper disc hub are the main advantages of Perfect CUT cutterbars. New cutterbar is mounted in every SaMASZ disc mower apart from KDL series based on Comer cutterbar.
       
2
Main advantages of PerfectCUT cutterbar:
1. Smooth regulation of cutting height from 4 to 7 cm - sliding skids from 5 to 9 cm.
2. 6307 2RSN bearings in bevel gears and 6307 2RS in disc modules are the most durable and unprecedented among our european competion.
3. Specially hardened discs and sliding skids made of Boron steel, protected against mud and dirt by means of the blades.
4. Easily replaceable knife holder pins.
5. Hardened knife holder made of Boron steel, especially designed in order to eliminate stucking of the knives under the disc.
6. Innovative system of quick knife replacement. The knife can be changed only when the disc is adjusted sheer to the cutterbar (+ - 30 degrees). The system decreases the probability of knife loss almost to absolute minimum in case of hitting into stone.
7. Modernized, hardened sliding skids made of Boron steel protect the whole surface of cutterbar on the bottom. Quick and easy replacement of the skids (only two bolts to unscrew).
8. Additional steel skid protecting cutterbar's drive.
9. Hardened cutterbar made of steel.
10. Protection against stones in standard equipment.
11. Quick and easy replacement of disc module thanks to modernized upper hub.
12. Bevel gears with 25 mm tightness.
13. High quality knives comply with strict safety rules. SaMASZ logo engraved on the knife is a guarantee of its quality.

 

1 Protection against stones in standard equipment

Specially designed disc module protects the cutterbar with bevel gears in case of very strong, extreme hit of the disc e.g in a stone. The force of the hit cuts off only the key. Then, only the module needs to be replaced without the necessity of expensive cutterbar repair. The replacement of the module takes only a while and can be done on the field. Owing to that solution the time crucial during forage pick-up is spared. Modernized upper disc hub enables quick module replacement. Special cavities for bolts make it very easy to disssemble the module without the necessity of unscrewing upper hub. The drive of the discs is transmitted by means of bevel gears with high diameter, which increases the resistance of the disc in case of hitting into an immovable obstacle.

 

2 Comparison of bevel gears
Our mowers are equipped with Perfect CUT cutterbars based on bevel gears transmitting higher strength.
       
5 Perfect quality of cut with Perfect CUT cutterbar
New Perfect Cut cutterbars have high quality of cutting even with very low grass during 3, 4 and further cuts. During 1 and 2 cut when high grass prevails it is recommended to cut with height between 53 mm and 68 mm. Depending on the angle of cutterbar's inclination there are the following cutting heights.
       
3 Perfectly profiled design
Rounded shapes of cutterbar's bottom surpass the designs of other manufacturers. Streamline shape facilitates operation on more earthen and stoney meadows. No sharp edges on the whole cutterbar, smooth surfaces of sliding skids give protection to the turf.
       
4
Quick knife replacement by means of special key.

 



Folders

 

 

ENG1

   
  DISC MOWERS  
 

pdf_ikona

Document size: 7,5 MB  


 



Gallery

 



Operator's Manuals

OPERATOR'S MANUALS
 
KDC trailed mowers  

KDC 300 S

KDC 300 S T

KDC 340 S

KDC 340 S T

KDC 300 W

KDC 300 W T

KDC 340 W

KDC 340 W T

  IN236PL   2,06 MB