Offer

MAMUT



Description

 

Type MAMUT 250 MAMUT 280 MAMUT 300
Working width [m / ft] 2,50 / 6’6” 2,80 / 9’2” 3,00 / 9’8’’
Power demand [HP] from 100 from 120 from 120
Number of knives [pcs.] 30 36 42
Number of replaceable counter-knives 1 row / 6 pcs. 1 row / 6 pcs. 1 row / 7 pcs.
3-point hitch cat. II
Transport width [m / ft] 2,70 / 8’1’’ 3,00 / 9’8’’ 3,20 / 10’6’’
RPM 1000 1000 1000
Flail shaft diameter [mm /in]
ϕ 203 / 8”

ϕ 203 / 8”

ϕ 203 / 8”
Necessary hydraulic couplers 1 x double acting 1 x double acting 1 x double acting
Number of V-belts 5 5 5
Weight [kg / lbs] 960 / 2115 1050 / 2315 1090 / 2403
Max. diameter of branches to be cut [mm /in] 80 / 3 1/5”
PTO shaft tractor - mower: no clutch (clutch built in gearbox)
 

 

 

Due to its strategy of continuous development, SaMASZ reserves the right to change technical data at any time and without any notice. All operational data and graphical materials found at our website are for reference only. Some of the equipment items are optional and not included in the standard equipment. For more details concerning warranty, safety and products, please contact your local SaMASZ dealer.

List of dealers:http://www.samasz.com/en/dealers

 

 


Technical Details

 SaMASZ_ flail_mowers_MAMUT_01
 

Heavy duty flail mower is designed for mulching soil fertalisation aiding plants (lupinus, phacelia, sinapis, rapeseed, field pea, rye) before tillage as well as plant remains like thick stalks as corn stalks for ploughing. It is also used for treatment of sterile pastures and maintenance of green areas which are not cultivated.

Mamut can be aggregated typically with tractors on tractor’s 3-point linkage Cat. II (3-point linkage Cat. II). Flail shaft is powered by tractor’s PTO shaft, while the shift by tractor’s hydraulics. Mower can be mounted both at tractor’s rear and front, which improves general comfort of operation. Mower is additionally equipped with transverse shift option to provide easier passing of obstacles and adjusting the most comfortable turning.

 

Advantages:

1. Cross traverse by 50 cm possible
2. Large working width providing efficiency
3. Mounting mower both at tractor’s rear and front possible
4. Large diameter of flail shaft (ϕ 203 mm) improves its stiffness and peripheral speed of knives
5. Innovative solution for protection of bearings and their lubrication
6. Mower’s body is made of 7 mm thick steel, owing to which mower’s overall weight has been reduced
7. Mower is equipped with new generation of heavy solid flails
8. Perfect fitting to ground and optimal mowing quality
9. Quick replacement of flail knives
10. Standard-delivered PTO shaft
11. Solid and durable construction
12. Simple flail replacement

 
 
FLAIL KNIFE TYPES
Typ VII

KNIFE TYPE VI

 

Designation:

-grass,

-shrubs,

-stalks,
-trimming remnants,

-stubbles
-Max. diameter of cut branches: ϕ 80 mm

 

FLAIL MOWERS - MULCHERS

 
Flail Mowers - Mulchers are designed for works related to maintenance of municipal infrastructure, urban greenery and orchards. Machines of this type are used for mowing grass, shrubs, bushes (up  to 10 cm) and cutting weeds on uncultivated areas  to leave windrows. Particularly useful in mowing road shoulders, ditches, as well as slopes and counter-slopes. Mulchers are designed for mowing grass, shredding it into pieces and then spreading the material all over the mowed area. This enables  obtaining a natural windrow, mineralisation of floral remains and re-introducing them to the soil.
 SaMASZ_ flail_mowers_MAMUT  

LIGHT CLASS - „LAMA”

 

1. Drive shaft with diameter - ϕ 108 mm
2. Mulching shrubs and bushes (up to ϕ 8 cm)
3. Ground following bar with diameter - ϕ 133 mm
4. Fair operating conditions

 

MIDDLE CLASS

 

1. Drive shaft with diameter - ϕ 133 mm
2. Mulching shrubs and bushes (up to ϕ 8 cm)
3. Ground following bar with diameter - ϕ 168 mm
4. Fairly difficult operating conditions


4
 

HEAVY DUTY

 

1. Drive shaft with increased diameter -
ϕ 168 mm or ϕ 203 mm (Mamut, Rio)
2. Mulching shrubs and bushes (up to ϕ 10 cm)
3. Ground following bar with diameter - ϕ 168 mm
4. Very difficult operating conditions
5. Sliding skids and internal cover made of steel
6. Bars resistant to deflections
7. Higher durability of thick-walled drive shaft and ground folowing bar

     

Additional Equipment

 

FLAIL KNIFE TYPES
 
STANDARD OPTION
1 1 1 1
TYPE VI TYPE II TYPE III TYPE IV



KNIFE TYPE VI - Designation: grass, shrubs, stalks, trimming remnants, stubbles, Max. diameter of cut branches: ϕ 80 mm
KNIFE TYPE II - Designation: grass, shoots, spikes, stalks, shrubs, mowing remnants, hay, Max. diameter of cut branches: ϕ 35 mm

KNIFE TYPE III - Designation: grass, shoots, spikes, stalks, shrubs, mowing remnants, hay, Max. diameter of cut branches: ϕ 35 mm

KNIFE TYPE IV - Designation: grass, tobacco, shoots, spikes, stalks, shrubs, mowing remnants, hay, Max. diameter of cut branches: ϕ 35 mm


Folders

 

 


 

 

ENG4

   
  FLAIL MOWERS - MULCHERS  
 

pdf_ikona

Document size: 4,4 MB  

 

 

Gallery


 

Operator's Manuals

OPERATOR'S MANUALS
 

KB

rear - front

 

KB 110

KB 140

KB 160

Grino 180

Grino 200

Grino 220

KB 182

KB 202

KB 252

KBK 181

KBK 201

KBK 251

Mamut 280

Rio 280

  IN341EN   3,98 MB