Basket Rake TWIST



Type TWIST 600
Working width [m / ft]  6,00 / 19’ 9’’
Windrow width [m / ft] 1,30 / 4’ 4’’
Transport width / height [m / ft]

2,35 / 3,50

7’7’’ / 11’5”

Working drums [pcs.] 2
Raking bar [pcs.] 5
Tines [pcs.] 18
Necessary hydraulic couplers 2 x double acting
Power demand [HP]* od 80
Working capacity [ha/h / ac/h] 6,00 / 15,00
3-point hitch cat. II
Tires (with inner tubes) 15x6,5
Drive type Hydraulic
Pump capacity (l/min) / (GPM) 30 / 7
Nominal pressure [bar / MPa] 160 / 16
Weight [kg / lbs] 770 / 1700

Due to its strategy of continuous development, SaMASZ reserves the right to change technical data at any time and without any notice. All operational data and graphical materials found at our website are for reference only. Some of the equipment items are optional and not included in the standard equipment. For more details concerning warranty, safety and products, please contact your local SaMASZ dealer.

List of dealers:



Technical Details



Comb side-delivery rake TWIST 600 is designed for quick, efficient and clean raking of hay, straw and green forage. It can be mounted either at tractor's front or rear. If mounted at the rear, it can produce raking and pressing simultaneously. The rake comprises two working units (drums) powered by the tractor's hydraulic assembly with two hydraulic motors, the speed of which is adjusted with a special valve TVTC. The rake's working units can be lifted by means of two cylinders, also powered by the tractor's hydraulic assembly. The rake features low weight in relation to its extensive working width.









- Extensive working width of 6 m = high efficiency
- Low weight in relation to working width – 770 kg
- Clean raking = clean forage
- Mounting at tractor's front and rear possible
- High working comfort
- Simultaneous raking and pressing (hay, straw, green forage) possible = saves time and fuel








Document size: 4,5 MB