Offer

Rotary rakes

Description

 

Type Z - 300 Z-301 Z - 350 Z-351 Z - 410 Z - 440 Z - 470 UNO 410 UNO 440 UNO 470
Working width [m / ft] 3,00 / 9’10” 3,00 / 9’10” 3,50 / 11’6’ 3,50 / 11’6’ 4,10 / 13’5” 4,40 / 14’5” 4,70 / 15’5” 4,10 / 13’5” 4,40 / 14’5” 4,70 / 15’5”
Windrow width [m / ft] 0,80 - 1,50 / 2’7” - 4’11”
Rotor diameter with arms [m / ft]
2,60 / 8’7” 2,60 / 8’7” 2,80 / 9’2” 2,80 / 9’2” 3,30 / 10’10’’ 3,60/ 11’8” 3,80 / 12’8” 3,30 / 10’10’’ 3,60/ 11’8” 3,80 / 12’8”
Transport width [m / ft] 2,60 / 8’7” 2,60 / 8’7” 2,80 / 9’2” 2,80 / 9’2” 3,30 / 10’10’’ 3,60/ 11’8” 3,80 / 12’8” 3,30 / 10’10’’ 3,60/ 11’8” 3,80 / 12’8”
Transport width without arms [m / ft 1,80 / 5’11” 1,90 / 6’3” 2,10 / 6’11” 2,30 / 7’7” 1,80 / 5’11” 2,35 / 7’8” 2,35 / 7’8”
Number of arms [pcs.] 8 9 11 13 11 11 13
Number of tines [pcs./arm] 3 4 4
RPM 540
Power demand [HP] from 20 from 20 od 25 from  25 from 40 od 45 from 50 from 35 from 40 from  45
Working capacity  [ha/h / ac/h] ~ 3,00 / 7,40 ~ 3,00 / 7,40 ~ 3,50 / 8,70 ~ 3,50 / 8,70 ~ 4,50 / 11,00  ~5,00 /  12, 35 ~ 5,60 ~ 4,50 / 11,00  ~5,00 /  12, 35  ~ 5,60 / 14,00
Tires (with inner tubes) 15 x 6.0-6 16 x 6,5-8 18 x 8,5-8
Necessary hydraulic couplers -
 1 x single acting
3-point hitch cat. II
drawbar
Weight [kg / lbs] 310 / 685 390 / 860 340 / 750 420 / 925 590 / 1300 750 / 1655 820 / 1810 740 / 1630 870 / 1920 890 / 1960
PTO shaft
tractor - rake: with overload clutch

 

 

Due to its strategy of continuous development, SaMASZ reserves the right to change technical data at any time and without any notice. All operational data and graphical materials found at our website are for reference only. Some of the equipment items are optional and not included in the standard equipment. For more details concerning warranty, safety and products, please contact your local SaMASZ dealer.

List of dealers:http://www.samasz.com/en/dealers

Technical Details


 

 

samasz_rotary_rake_01

 

Rotary rakes Z - 300, Z - 350, Z - 410, Z - 440, Z - 470 are made for middle and small farms, with working widths from 3,00 m up to 4,70 m (9’10” up to 15’5”).

samasz_rotary_rake

Z-350

 

 

samasz_rotary_rake

Z-410

   


 
 
   
 
 
5 Gearbox
Gearbox with extended connecting rods provide long fault-free operation.
   

 
 
6 7 Transport

Demountable tine arms as well as retractable swath curtain make the machine easy to store and handle.
   

 
 
10 Advatages of Z - 410, Z - 440, Z - 470 rakes

SaMASZ rotary rakes are characterized by unique design solutions:
1. Gearbox is permanently lubricated, works in oil-bath–high durability.
2. Tine arms secured in working arms with two linchpins
- picture 1 and 2.
3. Height adjustment of working unit regulated in two different ways:
- with winding handle
- by changing the wheel axle mounting
As standard the chassis height is set for –16 cm (6 1/3’’). When work is to be done on soft peat fields, the chassis hight needs to be increased. Wheel axle must be turned around 180°, this will give additional 5 cm (2’’) of height from the ground. Wheel axle regulation is important, because it increases durability of gearbox lower socket.
   

 
 
8 9 Tine arms

Tine arms are easy to dismount and place in its transport holding sockets. Rised swath curtains reduce transport and storage width.
   

 
 
11 12 Tandem wheels

Not every field is even and smooth, in order to get regular and clean windrow, a perfect ground following system is indispensable. Z-410, Z-440 and Z-470 rakes are equipped with tandem chassis as standard. Z-300 and Z-350 can have it on customers request.
   

 
 
   
 

UNO 410

Trailed 1-rotor rakes UNO 410 and UNO 470 are very efficient, especially designed for raking grass, hay or straw. Owing to low power consumption are very economical and also resistant to difficult working conditions. Rake forms a regular, continuous windrow, without grass twists, which allows fast drying and easy pick up with the use of a baler or self-collecting trailer. UNO rakes feature innovative height adjustment mechanism, which also lifts the machine to transport position and allows for ideal working height tune-up.

 

Advantages:
- tandem steering system
- new tine shape
- height adjustment
- facilitated drive over the swath
- aggregating with smaller tractors is possible

 

 

Thanks to running gear lifting, rotor is rised well above the ground (47 cm / 18 1/2”), and leaves the swath intact. Rake can be driven safely on uneven grounds, without the risk of any damage exposure.

Innovative steering system, based on solutions from DUO rake, facilitates the transport of the machine and provides comfortable transition from working to transport position.

   

 

 

 

 




Folders


 

 

ENG3

   
  ROTARY RAKES AND TEDDERS  
 

pdf_ikona

Document size: 4,5 MB  


 



Gallery

 

Z-440


Operator's Manuals

OPERATOR'S MANUALS
 

Single rotary rakes

 

Z-300

Z-350

Z-410

Z-470

  IN300EN   3,42 MB  
 

UNO 410

UNO  470

  IN0327US   1,42 MB